Once you have a site as well as an web application, speed is vital. The faster your site works and then the speedier your web applications work, the better for you. Considering that a web site is only an array of data files that connect to each other, the systems that store and access these data files have a huge role in site overall performance.
Hard disk drives, or HDDs, have been, until the past few years, the most dependable devices for keeping information. However, lately solid–state drives, or SSDs, are already gaining interest. Look into our evaluation chart to check out if HDDs or SSDs are more appropriate for you.
1. Access Time
With the arrival of SSD drives, file accessibility rates have gone through the roof. On account of the brand–new electronic interfaces used in SSD drives, the average data access time has been reduced to a all–time low of 0.1millisecond.
HDD drives continue to use the very same basic file access technology that’s initially developed in the 1950s. Even though it has been substantially enhanced since then, it’s sluggish as compared to what SSDs will offer. HDD drives’ file access speed varies between 5 and 8 milliseconds.
2. Random I/O Performance
Due to the unique revolutionary data storage method adopted by SSDs, they give you better data access rates and faster random I/O performance.
During NameThe.com’s lab tests, all of the SSDs demonstrated their ability to work with at least 6000 IO’s per second.
Having an HDD drive, the I/O performance gradually enhances the more you employ the disk drive. Nevertheless, just after it gets to a specific restriction, it can’t proceed swifter. And due to the now–old technology, that I/O limit is much less than what you could have with an SSD.
HDD are only able to go so far as 400 IO’s per second.
The absence of moving parts and spinning disks within SSD drives, and the current advancements in electronic interface technology have generated an extremely reliable file storage device, with a common failing rate of 0.5%.
As we have already documented, HDD drives depend on spinning hard disks. And anything that makes use of plenty of moving elements for lengthy periods of time is liable to failing.
HDD drives’ regular rate of failing ranges somewhere between 2% and 5%.
4. Energy Conservation
SSD drives are far smaller compared to HDD drives and they don’t possess any kind of moving elements whatsoever. It means that they don’t generate as much heat and require considerably less power to work and less power for cooling down purposes.
SSDs use up somewhere between 2 and 5 watts.
From the second they were created, HDDs have always been quite electricity–hungry equipment. When you’ve got a server with different HDD drives, this will likely add to the regular utility bill.
On average, HDDs use up between 6 and 15 watts.
5. CPU Power
SSD drives allow for better data file access rates, which will, consequently, permit the processor to accomplish file calls considerably quicker and afterwards to go back to additional tasks.
The average I/O hold out for SSD drives is just 1%.
HDD drives support reduced accessibility rates when compared to SSDs do, resulting for the CPU being required to wait around, whilst reserving assets for your HDD to uncover and return the demanded data file.
The typical I/O wait for HDD drives is around 7%.
6.Input/Output Request Times
It’s time for several real–world instances. We ran a detailed platform backup with a web server only using SSDs for data storage reasons. In that process, the typical service time for an I/O query remained below 20 ms.
Throughout the exact same tests with the exact same web server, now fitted out with HDDs, overall performance was considerably reduced. Throughout the hosting server back–up procedure, the average service time for any I/O demands fluctuated somewhere between 400 and 500 ms.
7. Backup Rates
A different real–life enhancement is the rate at which the data backup was created. With SSDs, a web server data backup today takes under 6 hours implementing our server–designed software solutions.
Alternatively, on a server with HDD drives, an identical back up might take three or four times as long to finish. An entire back up of any HDD–powered server typically takes 20 to 24 hours.
If you want to promptly add to the functionality of your web sites without needing to modify any kind of code, an SSD–equipped web hosting service will be a excellent option. Take a look at our web hosting packages and additionally our VPS servers – our solutions offer fast SSD drives and are offered at good prices.
- Live Demo
- All of our Virtual Private Servers provide no setup service fees and operate in a dependable network providing 99.9% of uptime. Full root and SSH access warranted.
Compare our prices
- Examine the resources and characteristics offered by our Virtual Private Servers. You can start off with a cheaper VPS Hosting configuration and upgrade with just a click as your demands increase.
- Compare our hosting plans
- Get in touch with us night and day by email or by utilizing NameThe.com’s extra–fast ticketing platform. Our techs are ready to respond to any queries in up to 60 mins.